MIL-STD-1179E
Table VI. Military wheeled and tracked vehicle infrared secure blackout lighting equipment requirements and locations.
Item |
Quality and color |
Military part numbers and photometric requirements 2/ |
Location |
Recommended height above road surface measured from center of item on vehicle at curb weight |
|
Tactical |
Combat |
||||
Blackout driving lamp 1/ Blackout front marker lamp 1/ Blackout tail & stop |
1-blue 2-yellow/ white 2-tail red/ orange 2-stop amber |
1-blue or 1-blue 1-tail red/ orange 1-stop amber |
12360910 (see 4.5.3) MS51318-1 7972325 (composite) (see 4.5.3) MS52126-2 (composite) (see 4.5.2) 7972325 (see 4.5.2) MIL-DTL- 32361 (see 4.5.4 & 4.5.5) MIL-DTL- 32361 (see 4.5.4 & 4.5.5) |
The light source shall be mounted between the center and left- hand side of the vehicle, as far forward and as near the line of the driver's vision as practicable. On the front - 1 on each side of the vertical centerline, at the same level, and as far apart as practicable. On the rear - 1 on each side of the vertical centerline, at the same level and as far apart as practicable. On rear right side of the vertical centerline at the same level as the rear left side and as far apart as practicable. |
Approximately 42 inches Not less than 15 inches, nor more than 72 inches. Not less than 15 inches, nor more than 72 inches. Not less than 15 inches, nor more than 72 inches. |
1/ Not required on trailers.
2/ All exterior infrared secure blackout lamp housings shall be metal unless otherwise specified.
28
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business