MIL-STD-1179E
such that there will be no power to the receptacle when the vehicle is in the blackout mode. The
CWL should be readily attachable and removable.
4.13 Provisions for wheeled vehicle CWL. Provide two waterproof receptacles on the top of the vehicle to provide power for a CWL. A separately fused, waterproof on/off switch shall be located in the cab within easy reach of the driver. The circuitry shall be such that there will be no power to the receptacle when the vehicle is in the blackout mode.
5. DETAILED REQUIREMENTS. Not applicable.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. This standard establishes the lighting, reflectors, and signaling requirements for military trucks, trailers, and truck-tractors. Due to the infrared secure blackout lighting requirements, this is considered military-unique.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this standard.
b. If required, the specific issue of individual documents referenced (see 2.2.1, 2.2.2, and 2.3).
6.3 Key words. Blackout
Blinkers Clearance Flashers Flashing Infrared Secure Lighting Warning
6.4 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business